Bumblebee Small
Med NUX Bumblebee-serien kan du designe ditt eget pedalbrett, og den lette vekten er perfekt
for deg som er opptatt av at brettet skal være lett å bære med seg. De 6 inkluderte
hyllene kan du selv arrangere som du vil.

Med over 10 års erfaring med å designe pedaler og tilbehør, lanserer NUX nå Bumblebee-serien.
De er laget av anodisert aluminium, og er dermed "solide som fjell, men lette som en fjær".
Den solide konstruksjonen gjør at både hyllene og sidene tåler å brukes, slik at du ikke
trenger å være bekymret når du tråkker på pedalene dine.

Hvis du bruker større kontroll-pedaler som MIDI-kontrollere eller NUX Cerberus o.l., er det
ikke noe problem - den modulære tolagskonstruksjonen sørger for nok plass til kabler,
strømforsyning osv.

Inkludert er også en praktisk bæreveske med reim, 3M "Dual Lock" borrelåsteip, og
kabelholdere. Bærevesken er kompakt nok (også på M- og L-modellene) til at den kan
medbringes som håndbagasje på fly i visse tilfeller (undersøk med flyselskapet hvis du
er i tvil).

- Dimensjoner (mm): 310 (bredde) x 243 (dybde) x 90 (høyde)
- Nettovekt: 1,3kg
- Vekt m/bæreveske: 2,1kg

Honey Comp 
Carl started years back with the Compressor Limiter…that big black hand-made-in-Denmark 
compressor that brought studio comps to the pedal board.  The word got out that it was 
just too big for modern pedal boards, so Carl redesigned that pedal into a much smaller 
format, preset (or fixed) the Threshold and Response leaving just two knobs for Comp and 
Level. The feedback we got was overwhelming…players were telling us the Comp Limiter had 
the same sonic clarity, the same headroom and the same quietness that the big studio comps 
had but was so quick and easy to use.  Carl could have left it there, but that’s not Carl!

Welcome the Honey Comp, and it’s as sweet as …. well, you know …. honey.  This pedal is the 
same as the Comp Limiter in every way … same Gray anodized finish, same footprint and the same 
simplicity of use with one compression control and one level control. It is pretty much the perfect 
compressor, so what could Carl possible upgrade? Easy!  Carl added a Dry volume which allows you 
parallel processing with three knobs!  Parallel Processing is a studio technique which takes a 
heavily compressed signal (which through compression loses some dynamics if not all) and allows 
you to add a clean (Dry) signal on top replacing those dynamics giving your guitar three-dimensionality 
and allowing the guitar to cut through the mix.  For those of you used to studio work, this is a very 
well-known technique, but usually too complex for a pedal board! The three knobs allow you to balance 
the Compressed signal with the Dry signal quickly and efficiently for a very pro sound!

The Carl Martin Honey Comp incorporates the special CM developed DC/DC converter circuitry. 
This enables us to run the pedal with +-12V internally, which is necessary, in order to maintain 
the same sonic quality and headroom as on the “old” Compressor/Limiter, using a regular 9V DC 200mA 
external power supply.

Specifications
Input: 1M Ohm
Output: 200 Ohm
S/N Ratio: 105 dB (clean out)
THD distortion: 0,05%
Compression Range: from 1:1 to 1:00
Dimensions : 60 (W) x 115 (D) x 50 (H) mm
Weight: 340g

NIGHT SUN HSA 080 ANGLE RANGE BEAM

HSA080 is a LED Zoom Beam Light; the white LED will
form changing of the light size beam effect after 
focusing image via the up and down movement of Fresnel
lens which drive by stepper motor. There are 
10 DIP switch on the back side of the light, a network
cable socket with one input and one output, 
and a 12V DC input socket. It’s easy to control and operate,
with small and exquisite appearance, stylish 
and practical, excellent beam effects. 
Widely used at home, KTV room, Disco Hall and other 
small entertainment places. 


Light Source: 8W LumiEngin-SC3  
LED Lamp Life:50000 hours 
DIP Switch:10  
Lens: Fresnel 
Control Channel:4 DMX Channels 
Control Protocol: International standard DMX512 control protocol 
Strobe:High- speed electronic adjustment strobe,  1- 20 flashes / sec 
Control Mode:DMX , Sound Activate , AUTO 
Optical effects: Strobe, the white LED will form changing of the light size 
beam effect after focusing image via the up and down movement of Fresnel 
lens which drive by step motor. 
Protection Rating:IP20 
Input Power:Adapter  AC100-240V  Light  DC12V 
Power consumption:12W 
Working Environment:up to 40? 
Lighting maximum surface temperature:50? 
Dimension:140.8×?102mm 
Gift box Package:250X150X115 (1pc/CTN) 
Master Package:505X460X365(18PCS/CTN) 
N.W:0.52Kg (1PC) 
G.W:0.86 kg (1PC) 
Application Fields: Widely used at Home, KTV room, Disco Hall, 
and small entertainment places, etc. 


Night sun ceiling buckle are sold separately 
art nr : 79707

 Buckle for ministage 

Altamira har produsert kvalitetsinstrumenter i en årrekke. Et tradisjonsrikt selskap med røtter i spansk gitarbygging.
Gitarene har usedvanlig god dybde, masse volum og en varm, full tone med herlig klarhet.

En av våre gitarlærer-kunder, som også anbefaler dem til sine studenter sier: 
"En rekke andre gitarlærere spilte på Alhambras, men de ble blåst bort av Altamira. 
De er fantastiske til prisen! 
Jeg kunne ikke tro lyden jeg hørte fra et instrument i denne prisklassen."


Lokk:              Heltre Seder
Sarg/Bunn:         heltre Afrikansk mahogni i sarg/bunn 
Hals:              Spansk Seder

Gripebrett:        Ibenholt
Sadel/nut:         Bein
Overflate:	   Blank
Ink. Orgial Altamira Softcase