U16-C7 is a condenser recording microphone. Its 14mm electrets capsule offers warmth and natural sound quality. 
Adjust low cut and sensitivity attenuator switches ensuring high sensitivity, low noise and wide frequency response 
also avoiding sound distortion. 304 stainless mesh makes U16-C7 sturdy and stable.

Capsule: Ø34mm gold-plated diaphragm
Polar Pattem: Cardioid
Frequency Response: 20Hz-20kHz
Sensitivity: -36dB±2db(0dB=1V/Pa at 1kHz)
Max.Input SPL: 130dB(at 1kHz=1%T.H.D)
Sampling Rate: 24Bit/96kHz            
Dynamic Range=89dB
Stereo ADC: SNR=90dB

Sammenleggbart og solid gulvstativ for ukulele, mandolin og fiolin etc.

THE FUZZ

The FUZZ setter nye standarder for forvrengning 
med sin revolusjonerende «wave guide». 

Ved hjelp av «wave guideen» er det lett å justere 
inn dype og høyde kontrollene og med den kraftige 
tre bånds EQ’n, blir det mulig å rydde opp i distrotion 
og forme lyden på en unik måte. 
Dermed blir det mulig å oppnå lyd som strekker seg fra en 
«old time blues crunch, til en mid 80-talls hard rock tone 
og helt frem til en hard metal sound. 

The Fuzz har en innebygd regulert (+-12V) strømforsyning.

Specifications
Input: 1M Ohm
Output: 100 Ohm
S/N Ratio: 90dB
Frequency responce deep: 40Hz - 400 Hz
Frequency responce high: 450Hz - 8kHz
Bass: 40Hz
Middle: 1kHz
High: 8kHz
Gain Max: 30dB
EQ Gain: +-20dB
Dimensions: 120 (W) x 95 (D) x 77 (H) mm
Weight: 625g


The Fuzz brukermanual

CARL MARTIN PLEXI RANGER

Plexi Ranger brukermanual



When we look back to the glory days of rock guitar (mid 60's to mid 70's), some of the most 
popular amplifier set-ups were British Marshalls and Vox's.....often with multi-speaker cabinets. 
Players like Tony Iommi, Ritchie Blackmore, Brian May etc, carved their signature sounds on stage 
and in the studio with these rigs, and in order to deal with the over-powering bottom end,
they made use of 'The Treble Booster'.

Treble Boosters add top end or higher frequencies to the guitar tone, and depending on how 
the amp is set up, some much desired overdrive. As much as companies like Dallas (Rangemaster) 
and Hornby Skewes (Treble Booster) were solving a bottom-end problem,they had also created 
a new sound pallette!

Carl decided it was time to re-introduce this sound with the PlexiRanger!  And leave it to Carl 
to add a gain channel along with the boost channel for a one-of -a-kind fx pedal!


The Carl Martin PlexiRanger incorporates the specially developed DC/DC converter cir­cuitry which 
allows us to run the pedal with +-12V internally in order to maintain the excel­lent sonic quality 
and headroom. The pedal is powered by us ing a 9V DC 1 00ma external power supply.


Spesifications
Input: 1M Ohm
Output: 200 Ohm
SIN Ratio: 54 dB
Tone: High Cut
Boost: + 15d B
Range: +15dB
Freq: 250 Hz-5kHz
Dimensions: 120 (W) x 95 (D) x 56 (H) mm
Weight: 420g

What’s more groovy than a flanger?  A new, smaller flanger, loaded with features and painted a bold psychedelic 
purple….that’s what!  

Introducing the re-designed Carl Martin Axis Flanger.
We simplified the controls to give you all the control you had with our Carl Martin Classic Flanger but reduced 
the size so you don’t have to worry about leaving the Axis Flanger on your pedalboard ‘cause you don’t have 
enough room’. Complete with a buffered Bypass footswitch for on and off control (indicated by an LED), Speed, 
Depth, Pre-delay and Feedback controls, the Axis Flanger comes in a machined aluminum case finished in 
psychedelic purple, and those cool Carl Martin 
graphics. The Axis Flanger  must be powered by a regulated 9v Power Supply like the Carl Martin DC Factory,  
and like all the Carl Martin fx pedals, we use the best parts to make sure you get the best sound!
Watch out baby…the flange is back!