Basic series padded water repellent nylon bag for mandolin
- Padding: 10 mm (0.39") foam and internal reinforcement areas for strings, 
  bridge and strap button
- Material: Water repellent nylon
- Grips: 2 shoulder straps and 1 handle
- Fastener: 1 zipper
- Special feature: 1 outer pouch
- Colour: Black

Stagg SDM 50 SET

MICRO & STAND+CABLE+CLAMP SET
Performer set with cardioid dynamic microphone, boom stand, 
XLR/XLR cable, rubber clamp and bag

- Included: Professional cardioid dynamic microphone with 
cartridge DC78 (SDM50), 103 - 166 cm (40.6 - 65.3") steel boom stand 
with folding legs (MIS-0822BK), XLR/XLR (m/f) cable, 6 m (20’) (SMC6), 
rubber clamp with thread adaptator (MH-6AH) and microphone nylon bag

This heavy duty, fully adjustable A-frame stand features a dual set of robust, height-adjustable, foldable support 
arms that ensure maximum versatility of use and allow for a variety of applications.
The BS625 can be configured to securely hold various sized combo amplifiers, up to two 12'' speaker cabinets and 
cabinet/amp head combinations. The tilt-back bottom amp holders are height adjustable to 4 positions, and can safely 
accommodate large size combo amps or speaker cabinets with up to 2 x 12'' speakers.

The top amp platform, featuring 6 height posit ions with safety locking pin and tilt adjustability, will securely 
hold combo amplifiers and amp heads. When positioned horizontally and with folded support arms, the top platform 
can also become a very suitable accommodation for guitar effects, rack cases or small mixers, leaving enough room 
for up to 70 cm high combo amplifier to be placed on the bottom support arms.

Tilt-back design and height adjust ability allow for ideal amp positioning from floor, optimal sound and fine 
quality list ening. Soft, rubber rest pads hold amps firmly in place.

Folds completely flat for easy portability and storage.

MSC/001 is the multifunction table stand with clamp developed by Quik Lok to achieve great adjustment 
versatility in a smallest possible size.
The top plate 25 cm wide and 29 cm deep allows you to use this support to obtain the positioning of 
your nearfield monitors at the optimal height and angle that best suits your listening needs; the front 
part has a 1 cm flange that, in case of angle of the top, does not allow the equipment to slip thanks 
to the convenient adhesive strips in 23 cm x 6 cm rubber supplied.

At the same time, the MSC  001 is also great to use devices such as mixers, tablets or small midi controllers.

The base is equipped with a clamp that can be anchored on tabletops up to 4.5 cm thick.

The upper plate is equipped at the base with a joint capable of allowing angles from 0 ° to 90 ° in order 
to obtain the right directionality of the monitors when raised, or the correct angle of mixer or MIDI 
controller for easy use.

MSC001 is adjustable in height by loosening the screw with the characteristic "Q" of Quik Lok, placing 
the locking pin in one of the five holes on the tubular linked with the clamp and finally tightening the knob. 
Through this procedure different heights can be obtained: from a minimum of 28,5 cm from the top up to a 
maximum of 36,5 cm, with increments of 2 cm for intermediate positions (28.5, 30.5, 32.5, 34.5 cm).

Material: Steel
Finish: Satin black
Maximum vise opening: 4.5 cm
Top shelf size: 25 cm x 29 cm
Height: 28,5,30,5,32,5,34,5 cm
Angle: 0°/90°